Software License Agreement

Micron Technology, Inc. Software License Agreement.

 


PLEASE READ THIS LICENSE AGREEMENT (“AGREEMENT”) FROM MICRON TECHNOLOGY, INC. (“MTI”) CAREFULLY: BY INSTALLING, COPYING OR OTHERWISE USING THIS SOFTWARE AND ANY RELATED PRINTED MATERIALS (“SOFTWARE”), YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE.

LICENSE: MTI hereby grants to you the following rights: You may use and copy the Software and redistribute it to third parties subject to the terms of this Agreement. You must maintain all copyright notices on all copies of the Software. MTI may make changes to the Software at any time without notice to you. In addition MTI is under no obligation whatsoever to update, maintain, or provide new versions or other support for the Software.

OWNERSHIP OF MATERIALS: You acknowledge and agree that the Software is proprietary property of MTI and is protected by United States copyright law and international treaty provisions. Except as expressly provided herein, MTI does not grant any express or implied right to you under any patents, copyrights, trademarks, or trade secret information. You further acknowledge and agree that all right, title, and interest in and to the Software, including associated proprietary rights, are and shall remain with MTI. This Agreement does not convey to you an interest in or to the Software, but only a limited right to use, copy and redistribute the Software in accordance with the terms of this Agreement. The Software is licensed to you and not sold.

DISCLAIMER OF WARRANTY: The Software is provided “AS IS” without warranty of any kind. MTI EXPRESSLY DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI, ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Because some jurisdictions prohibit the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

TERMINATION OF THIS LICENSE: MTI may terminate this license at any time if you are in breach of any of the terms of this Agreement. Upon termination, you will immediately destroy all copies the Software.

GENERAL: This Agreement constitutes the entire agreement between MTI and you regarding the subject matter hereof and supersedes all previous oral or written communications between the parties. This Agreement shall be governed by the laws of the State of Idaho without regard to its conflict of laws rules.

CONTACT: If you have any questions about the terms of this Agreement, please contact MTI’s legal department at (208) 368-4500.

By clicking on the Accept button, you agree to the terms of the License Agreement. You must agree to the terms in order to download the software.

Non-Disclosure Agreement

Micron Technology, Inc. NDA Agreement

To access these documents, you must first read and accept Micron's electronic non-disclosure agreement. If the Recipient has a written confidentiality agreement with Micron Technology, Inc. you will need to click "Accept" at the bottom of this page, but the terms of the written confidentiality agreement will apply.

ON-LINE NONDISCLOSURE AGREEMENT THIS IS A LEGAL AGREEMENT BETWEEN YOU OR THE COMPANY YOU REPRESENT (EACH A "RECIPENT") AND MICRON TECHNOLOGY, INC. ("MTI") STATING THE TERMS AND CONDITIONS THAT GOVERN THE CONFIDENTIALITY OF INFORMATION POSTED TO OR MADE AVAILABLE THROUGH THE MICRON WEBSITE. PLEASE CAREFULLY READ THIS NONDISCLOSURE AGREEMENT ("AGREEMENT") BEFORE CLICKING "ACCEPT" AT THE BOTTOM OF THE PAGE. BY CLICKING ON"ACCEPT", RECIPIENT IS AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF RECIPIENT DOES NOT AGREE TO THE TERMS OF THIS AGREEMENT, PRESS "DECLINE" AND RECIPENT WILL BE UNABLE TO ACCESS CONFIDENTIAL INFORMATION.

1. Written Nondisclosure Agreement. If Recipient and MTI have entered into a written confidentiality agreement ("Confidentiality Agreement") that is in effect as of the date Recipient enters into this Agreement and such Confidentiality Agreement already applies to and governs the Confidential Information (defined below), then the terms of such Confidentiality Agreement shall apply to and govern Recipient’s obligations concerning such Confidential Information and not the terms of this Agreement.

2. Confidential Information. "Confidential Information" means any information or data posted to or made available through MTI’s secure website that is (i) marked or labeled as "Confidential" or "Proprietary" or with similar designation, or (ii) of a nature that a reasonable person would know such information is confidential. Confidential Information does not include that which:

(i) is proven by Recipient through competent evidence to rightfully have already been in Recipient's possession at the time of disclosure without an obligation of confidentiality;

(ii) is or becomes available to the public through no fault or breach on the part of Recipient;

(iii) is independently developed by Recipient without use of or reference to the Confidential Information;

or (iv) is rightfully obtained from a third party who has the right to transfer or disclose it to Recipient without restriction.

3. Purpose of Disclosure and Restriction on Use. Confidential Information is disclosed hereunder strictly for the purpose of Recipient’s internal evaluation and/or to assist Recipient in the implementation of an MTI device or product into a commercial product ("Purpose"). Recipient shall use the Confidential Information solely in accordance with the terms of this Agreement to accomplish the Purpose and shall make no further use, in whole or in part, of the Confidential Information.

4. Non-Disclosure. Recipient agrees to protect the Confidential Information, using at least the same degree of care it uses to protect its own confidential and proprietary information, but in no case with less than reasonable care. Recipient shall not disclose, publish or disseminate Confidential Information to anyone other than those of its employees, agents, contractors and consultants (collectively "Representatives") who have a need to know the information in order to accomplish the Purpose and who are bound by a written agreement that prohibits unauthorized disclosure or use of Confidential Information on terms no less restrictive and protective than those contained within this Agreement. Recipient will be responsible for any violation of the terms of this Agreement by its Representatives. Recipient may disclose Confidential Information to the extent required by law, provided Recipient shall promptly notify MTI in writing of such requirement to disclose and Recipient shall cooperate with MTI’s efforts to protect the Confidential Information. Recipient shall notify MTI promptly in writing in the event of any disclosure of the Confidential Information which is not authorized under this Agreement.

5. Feedback. Notwithstanding any other provision in this Agreement, if Recipient provides any ideas, suggestions or recommendations to MTI regarding Confidential Information ("Feedback"), MTI is free to use and incorporate such Feedback in MTI’s products, without payment of royalties or other consideration to Recipient, so long as MTI does not infringe Recipient’s patents, copyrights or trademark rights in the Feedback.

6. Copies. Recipient shall not make any copies of Confidential Information except as strictly necessary to carry out the above-stated Purpose. Any copies that are made must be identical to the original, may not be modified, and shall be considered the property of MTI.

7. No License. No Warranty. Except as expressly set forth herein, no license is granted hereunder to any patents, copyrights, mask works, or trademarks either expressly, by implication, estoppel or otherwise. Any such license must be express and in writing from MTI. All Confidential Information shall remain the property of MTI and nothing in this Agreement shall restrict MTI from using, disclosing or disseminating such Confidential Information in any way. CONFIDENTIAL INFORMATION IS DISCLOSED HEREUNDER "AS IS" WITHOUT ANY REPRESENTATIONS OR WARRANTIES OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATIONS OR WARRANTIES AS TO THE ACCURACY, COMPLETENESS OR UTILITY OF SUCH CONFIDENTIAL INFORMATION.

8. Termination of Obligations of Confidentiality. This Agreement will become effective on the date Recipient clicks on "Accept." Notwithstanding any termination of this Agreement, the provisions of this Agreement shall continue for a period of five (5) years from the date of each disclosure of Confidential Information. MTI may terminate this Agreement at any time in its sole discretion upon written notice to Recipient (including such notice transmitted through this secure MTI website or via electronic mail to Recipient).

9. Return of Confidential Information. Within ten (10) business days of MTI’s written request, and at MTI’s option, Recipient shall return or certify to MTI the destruction of the Confidential Information including, without limitation, hard copy and electronic documents and all materials created by Recipient that contain the Confidential Information.

10. Governing Law and Attorneys' Fees. This Agreement shall be governed by the laws of the State of Idaho, U.S.A., excluding its conflict of laws principles. Recipient hereby consents to the personal jurisdiction of the courts of Idaho for any dispute arising out of this Agreement. In the event of any suit, action or proceeding arising out of or relating to this Agreement, the prevailing party will be entitled to reasonable attorneys' fees and reasonable costs incurred.

11. Export. Recipient agrees that Confidential Information, or any portion thereof, shall not be exported or re-exported, directly or indirectly, in any form, except in compliance with the U.S. Export Administration Act and all other applicable export control laws or regulations.

12. Injunctive Relief. Recipient acknowledges and agrees that disclosure of Confidential Information in violation of the terms of this Agreement will cause irreparable harm to MTI for which monetary damages would not be an adequate remedy. Therefore, Recipient agrees that, in addition to any other remedies available to MTI, in the event of any breach or threatened breach of this Agreement, MTI shall be entitled to injunctive relief and Recipient waives any requirement for the posting of a bond in connection therewith.

13. No Implied Waiver. MTI’s failure or delay in exercising any of its rights hereunder will not constitute a waiver of such rights unless expressly waived in writing.

14. General. This Agreement:

(i) may be amended or modified only by an express writing signed by Recipient and an authorized representative of MTI;

(ii) will not be construed as creating any joint venture, partnership or other form of business association between the parties hereto;

(iii) is not assignable or delegable in whole or in part by Recipient without the express written consent of MTI;

(iv) shall inure to the benefit of and be binding upon the parties, their successors, the assigns of MTI and the permitted assigns of Recipient;

and (v) is in the English language only, which language shall be controlling in all respects, and all versions of this Agreement in any other language shall not be binding on the parties hereto.

15. Authorized Signatory. The individual clicking on "Accept" is entering into this Agreement and accessing Confidential Information either (1) as an individual, and hereby agrees that he or she shall be personally liable to MTI if Confidential Information is disclosed or used in a manner not authorized by this Agreement, or (2) on behalf of an employer or other entity, and hereby represents and warrants that he or she has full legal authority to bind such employer or entity to this Agreement and that such employer or entity shall be legally bound by all of the terms and conditions of this Agreement as Recipient hereunder. IF CONFIDENTIAL INFORMATION IS FOR AN EMPLOYER OR ENTITY, BUT YOU DO NOT HAVE THE LEGAL AUTHORITY TO SO BIND SUCH EMPLOYER OR ENTITY, THEN DO NOT ACCESS, VIEW, READ, OR DOWNLOAD IN ANY WAY CONFIDENTIAL INFORMATION, AND DO NOT CLICK ON "ACCEPT."

In order to review documents, you must accept the NDA. If you do not accept these terms, select Decline to exit this menu.

Secure document access request Process

Thanks for being logged in as a registered micron.com user.

The document you are requesting requires some additional information. This information must be provided even if you have provided it in the past. Providing this information again could be necessary because Micron must validate your access.

Please complete the forms you are provided. This may consist of one or two forms:

  • Secure document access request form
    This form enables us to verify your company has a non-disclosure agreement (NDA) with Micron covering secure content, and confirms you are approved to view the document. If you have completed this form in the past for this document, you will not be prompted to fill out this form.
  • End user certification (EUC) form
    This form ensures your company complies with export controls. If your company has a valid EUC, you will not be prompted to fill out this form.

Secure document access request process FAQ

After you submit the requested form(s), access can take up to 10 days. You will receive an email confirming receipt of your submitted form(s).

If you have questions about your submission or this process, please contact Micron using the Contact us form. 

Sign in / Register

Welcome to Micron.com, please Log in or Register an account to continue.

Export Compliance Certification (ECC)

Micron Technology Inc. ECC Agreement

To access this information, you must agree to comply with all applicable U.S. export control restrictions, including all laws, regulations, and requirements.  By clicking “I Agree” below, you agree to comply with those restrictions, including that: 

  • You agree not to transfer or export the information:
    • To any non-U.S. person or location without obtaining any necessary approvals from the U.S. Government.
    • To any restricted countries such as the Crimea Region (including the Donetsk People’s Republic (DNR) and Luhansk People’s Republic (LNR) regions), Russia, Belarus, Cuba, Iran, North Korea, and Syria or to any sanctioned persons prohibited from receiving U.S. items or services.
  • You will refrain from using the information for activities related to the development, production, or support of advanced integrated circuits (ICs) at a semiconductor facility, or for the development, production, or support of supercomputers, in China or Hong Kong.
  • Except as permitted under U.S. law, you are not accessing the information for non-U.S. military activities (including activities related to weapons of mass destruction) or for the benefit of non-U.S. military entities or end users.
DESIGN TOOLS
Loading...

Suggested Search

    Recent Search

    Surplus

    Singapore Terms

    Below are the Terms and Conditions specific to Micron's surplus equipment located at our Singapore location.

    TERMS AND CONDITIONS

    1. Payment

    Buyer shall make payment in full, prior to collection of the Equipment. Payment shall be made by either a cashier's order or wire transfer. Buyer shall pay all applicable duties and taxes. Buyer shall pay all sales commissions, unless otherwise agreed to in writing by Micron. Buyer will send a cashier's order to: Micron Semiconductor Asia Pte. Ltd., Attn: Weng Loong (Jacky) Hoi, 990 Bendemeer Road, Singapore 339942.

    2. Delivery

    If the Equipment is to be shipped to a facility within Singapore the equipment shall be sold FOB Singapore (Incoterms 1990). If the Equipment is to ship outside Singapore the equipment shall be sold EXW Singapore (Incoterms 1990). Buyer shall pay all packaging, transportation and insurance costs.

    3. As a condition of this Agreement, Buyer undertakes:

    a. To assist seller and its related corporations in obtaining any required licenses and permits under all statutes, rules and regulations of the government of the United States of America and agencies thereof by supplying such documentation or information as any be requested by seller];

    b. To comply with such statutes, rules and regulations of the government of United States of America and agencies thereof;

    c. To maintain the necessary records to comply with such statutes, rules and regulations;

    d. Not to re-export any Equipment except in compliance with such statutes, rules and regulations;

    e. To obtain all governmental approvals and licenses necessary to import the Equipment into [the COUNTRY OF IMPORT if shipped outside of Singapore];

    f. Not to sell, transfer or otherwise dispose of the [Equipment/Goods] in violation of the export laws or other statutes, rules and regulations of the United States of America; and

    g. To indemnify and hold harmless seller and its related corporations from any and all fines, damages, losses, costs and expense's {including legal costs on a full indemnity basis} incurred by [MSA/manufacturer] as a result of any breach of any of the provisions of this Section 3 by Buyer or any of Buyer's customers.

    4. NO WARRANTY

    THE EQUIPMENT IS USED AND IS SOLD "AS IS", WITHOUT ANY WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR AGAINST INTELLECTUAL PROPERTY INFRINGEMENT. BUYER AGREES THAT IT ENTERS INTO THIS AGREEMENT WITHOUT RELYING ON ANY REPRESENTATION, WARRANTY OR OTHER PROVISION EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. ACCORDINGLY, ALL CONDITIONS, WARRANTIES OR OTHER TERMS IMPLIED BY STATUTE OR COMMON LAW ARE EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW.

    5. Limitation of Liability

    TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DAMAGES HEREUNDER OR IN CONNECTION HEREWITH, INCLUDING, BUT NOT LIMITED TO, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM SELLER'S PERFORMANCE OR FAILURE TO PERFORM HEREUNDER, WHETHER DUE TO BREACH OF CONTRACT, NEGLIGENCE, OR OTHERWISE.

    6. Governing Law

    This Agreement shall be governed by and construed in accordance with the laws of Singapore. The parties agree that Singapore courts have jurisdiction over them and this Agreement, that Singapore is an appropriate venue for any litigation arising hereunder, and that all litigation related to this Agreement shall, to the extent possible, be conducted in Singapore. The parties hereby acknowledge and agree that the provisions of the Sale of Goods (United Nations Conventions) Act, Chapter 283A are expressly excluded and shall not apply to the terms and conditions of this Agreement.

    7. Acceptance and Performance

    Time is of the essence in the execution and performance of this Agreement. Buyer shall have this Agreement executed by a duly-authorized representative of Buyer and return it to Seller within one (1) day of the date first set forth above. Buyer shall pay for and take delivery of the Equipment within ten (10) days of the date first set forth above.

    8. Sales Tax

    Any sales use and excise tax, goods and services tax shall be the responsibility of Buyer and may be collected by Seller, if required by law.

    9. General Provisions

    No remedy set forth herein shall be deemed exclusive but shall, wherever possible, be cumulative with all other remedies at law or in equity. The prevailing party or parties to any litigation or other proceedings arising out of this Agreement shall be entitled to recover its reasonable costs and attorneys' fees from the other party or parties. If it is determined by a court of competent jurisdiction as part of a final nonappealable ruling, government action or binding arbitration that any provision of this Agreement (or part thereof) is invalid, illegal, or otherwise unenforceable, such provision shall be enforced as nearly as possible in accordance with the state intention of the parties, while the remainder of this Agreement shall remain in full force and effect and bind the parties according to its terms. All section headings herein are for convenience only and are in no way to be construed as part of this Agreement or as a limitation or expansion of the scope of the particular sections to which they refer. No modification of, or amendment to, this Agreement (including any implied waiver) shall be effective unless in writing signed by all parties hereto. This Agreement sets forth the entire agreement and understanding of the parties with respect to the subject matter hereof and merges all prior or contemporaneous agreements and understandings (whether written verbal or implied) of the parties with respect thereto.