logo-micron

Add Bookmark(s)


To:

Email


Bookmark(s) shared successfully!

Please provide at least one email address.

Software Documentation

e.MMC Software


Software Documentation
  • File Type: ZIP
  • Updated: 10/27/2016
Software Documentation
  • File Type: ZIP
  • Updated: 10/06/2016
Software Documentation
  • File Type: ZIP
  • Updated: 08/31/2016
Technical Notes


(TN-FC-54) This technical note describes additional data refresh features available in Micron e.MMC automotive 5.0 devices built with Micron firmware.

  • File Type: PDF
  • Updated: 08/08/2016
Technical Notes


(TN-FC-47) This TN explains the commands used to remove data from an e.MMC device. All information applies to an automotive e.MMC with controller 5.0.

  • File Type: PDF
  • Updated: 06/20/2016
Software Documentation
  • File Type: ZIP
  • Updated: 05/27/2016
Technical Notes


(TN-FC-51) This technical note describes performance measurement of the Micron automotive e.MMC 5.0 device during validation and use model simulation.

  • File Type: PDF
  • Updated: 05/13/2016
Technical Notes


(TN-FC-50) This technical note introduces an optional cache feature available in the Micron automotive e.MMC 5.0 device.

  • File Type: PDF
  • Updated: 05/09/2016
Technical Notes


(TN-FC-45) Explains e.MMC device charge loss, in-system programming and preprogramming key parameters, and in-system programming and preprogramming routines.

  • File Type: PDF
  • Updated: 05/02/2016
Technical Notes


(TN-FC-46) This technical note describes how to configure the high-speed interface timing setting, HS200 and HS400, in e.MMC memory devices.

  • File Type: PDF
  • Updated: 04/18/2016
Software Documentation
  • File Type: ZIP
  • Updated: 02/25/2016
Technical Notes


(TN-FC-41) This technical note explains the difference between the two options and the guidelines to properly sanitize (purge) the sensitive data stored physically on Micron memory.

  • File Type: PDF
  • Updated: 09/24/2015
Technical Notes


(TN-FC-40) This technical note discusses the organization and configuration of Micron's e.MMC memory device.

  • File Type: PDF
  • Updated: 07/31/2015
Technical Notes


(TN-FC-35) This technical note is a guide for PCB designers using Micron e.MMC devices.

  • File Type: PDF
  • Updated: 01/08/2015
Technical Notes


(TN-FC-32) This technical note describes the Device Health Report procedure for Micron Mobile e.MMC memory devices.

  • File Type: PDF
  • Updated: 12/17/2014
Technical Notes


(TN-FC-25) This technical note provides a basic understanding of Linux driver support for block devices where e.MMC™ embedded memory is used.

  • File Type: PDF
  • Updated: 04/07/2014
Technical Notes


(TN-FC-27) This technical note describes how to ensure the integrity of internal system data and user data in the Micron e.MMC device during power loss.

  • File Type: PDF
  • Updated: 12/16/2013
Technical Notes


(TN-FC-06) This technical note describes the features of booting a system from an embedded MultiMediaCard (e.MMC) device. It discusses the boot capabilities introduced in the 4.41 version of the JEDEC e.MMC specification and explains how to configure an e.MMC device to have the required...

  • File Type: PDF
  • Updated: 04/29/2013
Technical Notes


(TN-52-05) This technical note describes supported and unsupported e.MMC features and how to enable them in Linux. It includes a discussion of the e.MMC standard (4.41) introduced in March 2010.

  • File Type: PDF
  • Updated: 04/17/2013
Technical Notes


(TN-FC-16) This technical note describes the BUFFER BLOCKS REFRESH command for Micron's e.MMC device.

  • File Type: PDF
  • Updated: 09/20/2012