Please enter a FBGA Code.
No part found
A world of ideas, memories, and knowledge - accessed, managed, and connected in ways never imagined. Memory makes it all possible.
Bookmark(s) shared successfully!
Please provide at least one email address.
512Mb 3.0V Micron XIP Hold pin
General low-level driver for N25Q serial NOR. Download the technical note for this driver here.
Part-specific certification of how this product meets the requirements of the current DIRECTIVE 2011/65/EU and 2015/863/EU, a.k.a. Restriction of Hazardous Substances (RoHS) Directive (Recast) without exemptions.
Part-specific certification as required by China's Management Methods for Controlling Pollution by Electronic Information Products.
This technical note describes the process for converting a system design from the Micron N25Q Flash memory device to the Micron MT25Q Flash memory device. PCN's 32162, 32163
This technical note describes the features of stacked devices for N25Q and MT25Q. These devices are memory with two or more dies in the same package.
This technical note describes shipping procedures for preventing memory devices from absorbing moisture and recommendations for baking devices exposed to excessive moisture.
This technical note provides a list of the reset configurations available for MT25Q, MT25T, and N25Q Flash memory devices.
The first section of this customer service note describes the product marks and labels we place on our devices. The second section describes the labels used on and in our packaging.
Provides information to enable customers to easily integrate both leading-edge and legacy Micron's ball grid array (BGA) packages into their manufacturing processes. It is intended as a set of high-level guidelines and a reference manual describing typical package-related and...