logo-micron
Products
  • Memory
Solutions
  • By Industry
Content Types
  • Most Popular
  • All Content Types (A-Z)

This technical note describes performance measurement of the Micron automotive e.MMC 5.0 device during validation and use model simulation.

  • Last Updated: 05/13/2016
  • File Type: PDF

This technical note describes how to configure the high-speed interface timing setting, HS200 and HS400, in e.MMC memory devices.

  • Last Updated: 03/02/2017
  • File Type: PDF

Explains e.MMC device charge loss, in-system programming and preprogramming key parameters, and in-system programming and preprogramming routines.

  • Last Updated: 05/25/2016
  • File Type: PDF

This technical note describes how to check for and correct the QSR timeout condition.

  • Last Updated: 08/03/2017
  • File Type: PDF

This technical note explains the difference between the two options and the guidelines to properly sanitize (purge) the sensitive data stored physically on Micron memory.

  • Last Updated: 09/24/2015
  • File Type: PDF

This technical note provides a basic understanding of Linux driver support for block devices where e.MMC™ embedded memory is used.

  • Last Updated: 04/08/2014
  • File Type: PDF

This technical note describes the BUFFER BLOCKS REFRESH command for Micron's e.MMC device.

  • Last Updated: 09/20/2012
  • File Type: PDF

This technical note describes the features of booting a system from an embedded MultiMediaCard (e.MMC) device. It discusses the boot capabilities introduced in the 4.41 version of the JEDEC e.MMC specification and explains how to configure an e.MMC device to have the required...

  • Last Updated: 04/29/2013
  • File Type: PDF

This technical note describes the Device Health Report procedure for Micron Mobile e.MMC memory devices.

  • Last Updated: 12/17/2014
  • File Type: PDF

This technical note describes the changes to the JEDEC e.MMC specification from version 4.4 to version 4.41.

  • Last Updated: 08/22/2012
  • File Type: PDF