logo-micron
Products
  • Memory
Solutions
  • By Industry
Content Types
  • Most Popular
  • All Content Types (A-Z)

This TN explains the commands used to remove data from an e.MMC device. All information applies to an automotive e.MMC with controller 5.0.

  • Last Updated: 06/29/2017
  • File Type: PDF

This technical note describes how to configure the high-speed interface timing setting, HS200 and HS400, in e.MMC memory devices.

  • Last Updated: 03/02/2017
  • File Type: PDF

This technical note describes the BUFFER BLOCKS REFRESH command for Micron's e.MMC device.

  • Last Updated: 09/20/2012
  • File Type: PDF

This technical note describes the changes to the JEDEC e.MMC specification from version 4.4 to version 4.41.

  • Last Updated: 08/22/2012
  • File Type: PDF

This technical note describes the features of booting a system from an embedded MultiMediaCard (e.MMC) device. It discusses the boot capabilities introduced in the 4.41 version of the JEDEC e.MMC specification and explains how to configure an e.MMC device to have the required...

  • Last Updated: 04/29/2013
  • File Type: PDF

This technical note describes the Device Health Report procedure for Micron Mobile e.MMC memory devices.

  • Last Updated: 12/17/2014
  • File Type: PDF

This technical note is a guide for PCB designers using Micron e.MMC devices.

  • Last Updated: 01/08/2015
  • File Type: PDF

This technical note describes additional data refresh features available in Micron e.MMC automotive 5.0 devices built with Micron firmware.

  • Last Updated: 04/07/2017
  • File Type: PDF

This technical note describes supported and unsupported e.MMC features and how to enable them in Linux. It includes a discussion of the e.MMC standard (4.41) introduced in March 2010.

  • Last Updated: 04/18/2013
  • File Type: PDF

This technical note describes how to ensure the integrity of internal system data and user data in the Micron e.MMC device during power loss.

  • Last Updated: 12/16/2013
  • File Type: PDF