logo-micron
Products
  • Memory
Content Types
  • Most Popular
  • All Content Types (A-Z)

This technical note describes how serial presence-detect (SPD) is essential in helping to standardize the configuration, timing, and manufacturing information of memory modules.

  • Last Updated: 12/16/2009
  • File Type: PDF

This technical note explains why DDR3 Mini-UDIMMs are the best choice for systems that don't actually require registered DIMMs.

  • Last Updated: 04/07/2010
  • File Type: PDF

This technical note provides a design guide to assist board designers implementing products using UDIMM systems.

  • Last Updated: 01/11/2010
  • File Type: PDF

DDR2-533 memory design guide for two-DIMM, unbuffered systems

  • Last Updated: 12/16/2009
  • File Type: PDF

This technical note identifies and discusses five key areas of DRAM controller design.

  • Last Updated: 04/16/2008
  • File Type: PDF

This technical note provides the system-level designer with an overview of the DDR2 SODIMM family and offers insight into termination techniques utilized on the commands and addresses for these modules.

  • Last Updated: 05/16/2005
  • File Type: PDF

Describes DDR333 design guide for two-DIMM unbuffered systems

  • Last Updated: 12/16/2002
  • File Type: PDF

Describes bypass capacitor selection for high-speed designs.

  • Last Updated: 03/23/2011
  • File Type: PDF

This technical note describes shipping procedures for preventing memory devices from absorbing moisture and recommendations for baking devices exposed to excessive moisture.

  • Last Updated: 02/14/2013
  • File Type: PDF

This technical note provides guidance on wire bonding techniques for both nickel-palladium (NiPd) and aluminum (Al) bond pads on Micron products.

  • Last Updated: 11/23/2010
  • File Type: PDF