Micron 9400 NVMe SSD Firmware Update Instructions (F1MU0000) Scope This document describes how to upgrade the firmware on a Micron 9400 NVMe SSD to F1MU0000 using either nvme-cli or msecli. For further assistance with this process please contact your local Micron representative. Upgrade using nvme-cli: 1. Download and install latest version of nvme-cli from github.com: a. https://github.com/linux-nvme/nvme-cli/releases 2. Obtain the required Micron 9400 SSD firmware from your Micron contact or from www.micron.com: a. Firmware name: Micron_9400_F1MU0000_release.bin 3. List the SSDs in the system: a. nvme list b. Note: The target name (nvme) for the SSD 4. To download the firmware, use the following nvme-cli commands: a. nvme fw-download /dev/nvme -f Micron_9400_F1MU0000_release.bin b. Note: The same firmware file is used for all form factors and densities 5. Now you need to commit the firmware, use the following nvme-cli command: a. nvme fw-commit /dev/nvme -s 2 -a 3 6. Confirm the firmware has been successfully updated to version F1MU0000 a. nvme list Upgrade using msecli 1. Download and install latest version of msecli from micron.com: a. https://www.micron.com/products/solid-state-storage/storage-executive-software 2. Obtain the required Micron 9400 SSD Firmware from your Micron contact or from www.micron.com: a. Firmware name: Micron_9400_F1MU0000_release.bin 3. List the SSDs in the system: a. msecli -L b. Note: The target name ( ) for the SSD 4. To download the firmware use the following msecli command: a. msecli -F -U Micron_9400_F1MU0000_release.bin -n b. Note: The same firmware file is used for all form factors and densities 5. Confirm the firmware has been successfully updated to version F1MU0000 a. msecli -L Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2023 Micron Technology, Inc. All rights reserved.